Cicada Audio FLX2000.4 Amplifier
PRODUCT INFORMATION
Cicada Audio FLX2000.4 Amplifier
$1,149.99
$1,149.99
Couldn't load pickup availability
Additional Payment Info
-
Description
-
Reviews
Cicada Audio FLX2000.4 — Compact 4-Channel Power for Bagger Audio
Big-boy power, small footprint. The FLX2000.4 drives front + rear speakers with serious output from a compact, bike-ready chassis. With HPF/LPF crossovers, REM/DC turn-on, and clean tuning, it’s built for Harley-Davidson® and Indian® touring systems that need highway-clear volume without bulky gear.
Why Riders Choose It
- Serious output — up to 542×4 @ 2Ω or 1044×2 bridged @ 4Ω (14.4V).
- Compact chassis — 8.6″ × 4.9″ × 2.0″ tucks behind fairings/bags.
- Bike-ready — conformal-coated PCB, designed for motorcycles.
- Flexible turn-on — REM / DC integration.
- On-board crossovers — HPF / FULL / LPF 30–300 Hz, 12 dB/oct.
Best With
- Front & rear speakers at 2–4Ω
- Bridged 4Ω pairs for lids or mid-bass
- OFC wiring with 4 AWG power & correct fusing
- Factory radio or DSP — we’ll map gains & filters
Tell us your bike and speakers — we’ll set crossover points and gains for loud, clean highway performance.
Key Specifications
| RMS Power @ 4Ω (12.5V / 14.4V) | 275 × 4 / 331 × 4 |
|---|---|
| RMS Power @ 2Ω (12.5V / 14.4V) | 450 × 4 / 542 × 4 |
| Bridged @ 4Ω (12.5V / 14.4V) | 866 × 2 / 1044 × 2 |
| Frequency Response | 20 Hz – 20 kHz (±3 dB) |
| THD (1 kHz) | < 0.5% (≈0.1% at 10% rated power) |
| SNR (A-wt) / Damping Factor | 91 dB / 200 |
| Crossovers | HPF / FULL / LPF: 30–300 Hz; 12 dB/oct |
| Turn-On Modes | REM / DC |
| Operating Voltage | 8 – 16 V |
| Current Draw (Music / Max) | 60 A / 240 A |
| Recommended Fuse (Music) | 120 A |
| Efficiency | ~79% |
| Gain Range | 0.2 – 12 V |
| Dimensions (L × W × H) | 8.6″ × 4.9″ × 2.0″ (218 × 124 × 51 mm) |
Specs from Cicada’s product page and manual; multiple dealers corroborate power ratings and crossover ranges. Always verify wiring/impedance before power-on.
Frequently Asked Questions — Motorcycle Audio
Can it run fronts and lids with one amp?
Yes — many builds run four channels at 2–4Ω. Use HPF/LPF and proper gains for clean balance.
Will it work with my factory radio?
Yes. Use REM or DC turn-on and set gains carefully. Add a DSP if you need advanced EQ/time alignment.
Can I bridge it for more power?
Yes — bridge pairs at 4Ω for up to ~1044 W × 2 (14.4V). Use LPF for mid-bass duty as needed.
What wiring and fuse do I need?
Use OFC power/ground with 4 AWG power and fuse at the battery (120 A music). Keep grounds short and solid.
Is it motorcycle-ready?
Yes — designed for bikes with conformal-coated PCB. Mount away from direct spray and protect cables from abrasion/heat.
Garage Bagger Stereo Advantage
- Bike-specific amp placement & heat management
- Clean, serviceable OFC wiring and correct fusing
- On-bike tuning for loud, clear highway performance
- Nationwide shipping and tech support
Need Help?
Call us at (864) 334-6131 with your bike and speakers. We’ll map gains, filters, and wiring for your exact setup.